Heat Activated Cooling Fan Controller
- Rajkumar Sharma
- 29.725 Views
- SKU: EL49963
- Quote Now
Heat activated cooling fan controller is a simple project which operates a brushless fan when the temperature in a particular area goes above a set point, when temperature return normal, fan automatically turns off. The project is built using LM358 Op-amp and LM35 temperature Sensor. Project requires 12V DC supply and can drive 12V Fan. This project is useful in application like Heat sink temperature controller, PC, heat sensitive equipment, Power supply, Audio Amplifiers, Battery chargers, Oven etc
The SMD SO8 LM35 used as temperature sensor, LM358 act as comparator and provides high output when temperature rise above set point, high output drive the Fan through driver transistor. The LM35 series are precision integrated-circuit temperature devices with an output voltage linearly-proportional to the Centigrade temperature. The LM35 device has an advantage over linear temperature sensors calibrated in Kelvin, as the user is not required to subtract a large constant voltage from the output to obtain convenient Centigrade scaling. The LM35 device does not require any external calibration or trimming to provide typical accuracy of ±¼°C at room temperature. Temperature sensing range 2 to 150 centigrade. LM35 provides output of 10mV/Centigrade.
- Supply 12V DC 1Amps
- Fan 12V DC , 500mA
- Range : 2 °C to 150 °C
- Open Collector Output
- It can drive PC fan
- Onboard preset to set the Fan trigger level
- Onboard Power LED
- Onboard Output LED
- Output Driver Transistor
- Header Connector for Supply and Fan
- PCB dimensions 59.85 mm x 12.70 mm
24 Hours fast turnaround, Excellent quality & Unbeatable prices
$18 Welcome Bonus for new registrations Now https://jlcpcb.com
what is omit? Sorry i don’t know. very good project
Omit, means don’t place that component on PCB.
Is there somewhere I could buy the components for this project?
Please check on http://www.koteq.com for kits of our projects.